PULSED LIGHT STERILIZATION EQUIPMENT
TO BE INTEGRATED INTO NEW OR EXISTING FILLING LINES
Decontamination levels: 3 to 5 log reduction on reference germs
All our microbiological tests have been carried out in accordance with the VDMA’s recommendations
Packaging for beverages
Closed loop water cooling
Can and can end
330 ml – Up to 360 cans/min
500 ml – Up to 240 cans/min
Pulsed light decontamination of the can and can end, surface in contact with the product, before filling and sealing the lid;
Adapted to Ultra-Clean Line without pasteurization tunnel.
Format Up to 500 ml alu can.
3 Log-Red on Aspergillus brasiliensis (VDMA Class IV )
Lid
Up to
16 000 lids/hour
Pulsed light decontamination of both sides of the lid: the surface in contact with the product or in contact with the aluminum lid, to avoid any risk of recontamination when re-staking.
Packaging for liquid product
HIGH SPEED CAN
Up to 600 cans / minute
Microbiological decontamination of the inside of the can.
All types of metal or aluminum cans, all capacities.
The integration of the pulsed light sterilization equipment can be carried out by Claranor.
- Compact: 1 to 2 m
- Instant treatment, no preheating
- No water consumption
- Non-thermal, no heat generation in the working environment
- No chemical residues
- Economical and sustainable thanks to low energy consumption
- Reduced carbon footprint
LOW SPEED CAN
Up to 400 cans/minute
Microbiological decontamination of the inside of the can.
All types of metal or aluminum cans, all capacities.
The integration of the pulsed light sterilization equipment can be carried out by Claranor.
- Compact: 1 to 2 m
- Instant treatment, no preheating.
- Non-thermal, no heat release.
- No chemical residues.
- Economical and sustainable due to low energy consumption.
- No water consumption
ALU AND METAL LID
Up to 200 lids/minute
Microbiological decontamination of both sides of the lid to avoid recontamination during re-stacking
All types and sizes of aluminum and metal lids
- Lid unstacking and conveying equipment developed in partnership with Guylegall
- Instant processing
- No heating time
- All lids receive the same treatment
- Athermal
- No risk of chemical residues
- Economical and durable thanks to its very low energy consumption.
Packaging for infant powder milk
Dry treatment, air cooling
Can and can end
Up to 400 cans/minute
Pulsed light decontamination of the can and can end, product contact surface, before filling and sealing the lid; without water.
Lid
Up to 16 000 lids/hour
Lid with or without integrated spoon
Pulsed light decontamination of the surface in contact with the product or in contact with the aluminium lid, to avoid any risk of recontamination when opening.